ID personalisation

Turn verified data into verifiable credentials

ID cards and passports, printed, encoded and ready to check on the spot.

ID personalisation

Turn verified data into verifiable credentials

ID cards and passports, printed, encoded and ready to check on the spot.

The personalisation process

How a record becomes an ID document

How a record becomes an ID document

Data preparation

Data preparation

Verified biographic and biometric data is assembled into a print-ready record, with the photo, personal details and machine-readable fields laid out to the document specification. The software locks the production settings, so a card printed at one site matches a card printed at any other.

Card and document printing

Card and document printing

Direct-to-card and document printers apply high-resolution text, photos and graphics to the card or page. Laxton personalises polycarbonate, PET and PVC cards as well as passport and travel-document booklets, with printing set up for the security and durability each programme needs.

Security features

Security features

Security features are added during personalisation, including laser engraving, UV printing, holographic overlays and tamper-evident laminates. They tie the holder’s data to the document and make alteration or counterfeiting visible at inspection.

Chip encoding

Chip encoding

Where the document has a chip, the holder’s biographic and biometric data is written to it and digitally signed, so any later change can be detected. Encoding follows international standards, so compliant readers at borders and government offices can read and check it.

Quality control

Quality control

Before issue, each document is checked automatically and by eye for print quality, correct data, a working chip and intact security features. Failed cards are logged as spoiled and reconciled against stock, so every blank and issued card is accounted for.

Instant and central issuance

Instant and central issuance

Personalisation can run at the point of registration, so the citizen leaves with the document, or in a central facility for high-volume programmes. Both use the same verified data and quality checks.

A citizen holding her national ID card
A citizen holding her national ID card

Turning records into documents

Once a citizen’s data has been captured, checked and deduplicated, personalisation prints it onto an ID card or travel document, encodes it on the chip and adds the security features. A database record becomes a document the holder can carry and others can check.

Hard to alter, easy to check

Laser engraving, UV printing and tamper-evident features bind identity to the document and make alteration detectable on sight.

Built to international standards

Chip and machine-readable data follow international standards, so compliant border and government systems can read and check them.

Frequently asked questions

What is personalisation in the ID issuance process?

Personalisation adds one person’s details to a blank card or passport: their photo and data are printed or engraved, the chip is encoded and the security features are applied.

What security features are applied during personalisation?

Laser engraving, UV printing, holographic overlays and tamper-evident laminates. Each programme chooses the mix to suit the document type and the risk of forgery.

What is the difference between instant and central issuance?

Instant issuance personalises the credential at the point of registration, so the citizen leaves with their document. Central issuance produces credentials at volume in a dedicated facility. Both use the same verified data and quality controls.

Are Laxton’s personalised documents internationally compliant?

Yes. Our card personalisation systems and ID documents are made to international standards, so compliant readers can check them.

What types of documents can Laxton personalise?

Polycarbonate, PET and PVC ID cards, plus passport and travel-document booklets. Printing and security features are matched to how long each document must last and how hard it must be to forge.

How does chip encoding work?

While the card is personalised, the holder’s data and photo are written to the chip and digitally signed with the issuing authority’s key. A reader checks that signature to confirm the data is genuine and has not been changed.

How is quality controlled during personalisation?

Every document is checked by machine and by eye before it is issued. A card that fails any check is logged as spoiled, so stock records always match the cards produced.

Frequently asked questions

What is personalisation in the ID issuance process?

Personalisation adds one person’s details to a blank card or passport: their photo and data are printed or engraved, the chip is encoded and the security features are applied.

What security features are applied during personalisation?

Laser engraving, UV printing, holographic overlays and tamper-evident laminates. Each programme chooses the mix to suit the document type and the risk of forgery.

What is the difference between instant and central issuance?

Instant issuance personalises the credential at the point of registration, so the citizen leaves with their document. Central issuance produces credentials at volume in a dedicated facility. Both use the same verified data and quality controls.

Are Laxton’s personalised documents internationally compliant?

Yes. Our card personalisation systems and ID documents are made to international standards, so compliant readers can check them.

What types of documents can Laxton personalise?

Polycarbonate, PET and PVC ID cards, plus passport and travel-document booklets. Printing and security features are matched to how long each document must last and how hard it must be to forge.

How does chip encoding work?

While the card is personalised, the holder’s data and photo are written to the chip and digitally signed with the issuing authority’s key. A reader checks that signature to confirm the data is genuine and has not been changed.

How is quality controlled during personalisation?

Every document is checked by machine and by eye before it is issued. A card that fails any check is logged as spoiled, so stock records always match the cards produced.

Frequently asked questions

What is personalisation in the ID issuance process?

Personalisation adds one person’s details to a blank card or passport: their photo and data are printed or engraved, the chip is encoded and the security features are applied.

What types of documents can Laxton personalise?

Polycarbonate, PET and PVC ID cards, plus passport and travel-document booklets. Printing and security features are matched to how long each document must last and how hard it must be to forge.

What security features are applied during personalisation?

Laser engraving, UV printing, holographic overlays and tamper-evident laminates. Each programme chooses the mix to suit the document type and the risk of forgery.

How does chip encoding work?

While the card is personalised, the holder’s data and photo are written to the chip and digitally signed with the issuing authority’s key. A reader checks that signature to confirm the data is genuine and has not been changed.

What is the difference between instant and central issuance?

Instant issuance personalises the credential at the point of registration, so the citizen leaves with their document. Central issuance produces credentials at volume in a dedicated facility. Both use the same verified data and quality controls.

How is quality controlled during personalisation?

Every document is checked by machine and by eye before it is issued. A card that fails any check is logged as spoiled, so stock records always match the cards produced.

Are Laxton’s personalised documents internationally compliant?

Yes. Our card personalisation systems and ID documents are made to international standards, so compliant readers can check them.